COIM products
Italian thermoplastic polyurethane since 1962. Laripur TPU in polyester, polyether and polycaprolactone chemistries, and Laricol reactivable adhesives, supplied across North America from stock.
Italian thermoplastic polyurethane since 1962. Laripur TPU in polyester, polyether and polycaprolactone chemistries, and Laricol reactivable adhesives, supplied across North America from stock.
COIM Group has developed and produced specialty polymers in Italy since 1962, with plants and offices on five continents. Laripur is their thermoplastic polyurethane line and Laricol is their reactivable adhesive line. Both are made at the Offanengo plant near Cremona.
The Laripur grades on this page run from Shore A 66 to Shore D 77, in polyester, polyether and polycaprolactone chemistries. Each grade page carries the typical properties from COIM's own technical data sheet, the applications COIM lists for it, the drying and temperature profile, and the packaging.
P.A.T. Products is the North American distributor for the Laripur and Laricol lines and has sold them for close to four decades. Stock is held in the United States and ships across the United States, Canada and Mexico. Samples ship from stock and cross-references to commonly specified TPU grades are available on request.
Extrusion versions carry an end code on the order. COIM identifies them with a code such as EG or AE after the grade number, and that code has to be on the purchase order when the material is going into a die. Tell us the process and we will confirm which version you need.
Polyester based thermoplastic reactivable adhesive. A polyester based thermoplastic reactivable adhesive in white pellet form. Reactivates at 55 to 60 degrees C, with a short open time and a high crystallization rate.
View product →Polycaprolactone ester TPU. Polycaprolactone ester TPU at Shore 84 A. Watch belts, bellows, seals and technical items, with extrusion of hose, profile, transmission belt and film.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 90 A with very good resistance to hydrolysis and microbial attack. Injection moulded technical items, and extrusion of hose, profile, transmission belt and film.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 92 A, built for high performance seals of wide applicability and pneumatic sealing in particular. Compression set is published.
View product →Polyester TPU. An extrusion-only polyester grade at Shore 46 D. Hoses, profiles, transmission belts and films.
View product →Polyester TPU. Polyester TPU at Shore 51 D. Injection moulded technical items and sport soles in the standard version, hose, profile, belt and film in the 5225EG extrusion version.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 50 D with very good resistance to hydrolysis and microbial attack. Ski boots and technical items, with 5260EG for hose, cable, profile and film.
View product →Polyester TPU. Polyester TPU at Shore 56 D with 9500 psi tensile strength. Technical items, sport soles and cattle tags, with 5725EG for hose, profile, belt and film extrusion.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 56 D with very good resistance to hydrolysis and microbial attack. Injection moulded ski boots and technical items.
View product →Polyester TPU. Polyester TPU at Shore 59 D with 9800 psi tensile strength. Injection moulded technical items and footwear components.
View product →Polyester TPU. Hard polyester TPU at Shore 62 D with 10000 psi tensile strength and 193 N/mm tear. Injection moulded technical items and footwear components.
View product →Plasticized polyester TPU, transparent. A plasticized, fully transparent polyester TPU at Shore 66 A with 870 percent elongation. High flexibility soles, with excellent adhesion to two component PU systems.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 65 D with very good resistance to hydrolysis and microbial attack. Injection moulded ski boots and technical items.
View product →Polyester TPU. The softest polyester grade in the range at Shore 70 A, with 670 percent elongation. Technical items and tool overmoulding, with 7025EG for hose, profile and film.
View product →PTMG polyether TPU. A hard PTMG polyether TPU at Shore 70 D with very good resistance to hydrolysis and microbial attack. Ski boots and technical items, with 71D60 EG for sheet and profile extrusion.
View product →Polyester TPU. The hardest polyester grade in the range at Shore 67 D, with 10300 psi tensile and 228 N/mm tear. Technical items, footwear components and wheel parts.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 77 A with very good resistance to hydrolysis and microbial attack. Seals and technical items, with 7560EG for hose, cable, profile and film.
View product →High modulus engineering TPU. A high modulus engineering thermoplastic polyurethane at Shore 77 D, the hardest grade in the range. Injection and extrusion of technical items.
View product →Polyester TPU. Polyester TPU at Shore 84 A. Injection moulded sport soles, wheels, screen elements, masks and technical items, with 8025EG for hose, profile, belt and film extrusion.
View product →Polyester TPU. Polyester TPU at Shore 83 A that COIM builds for hydrolysis resistance. Sport soles, wheels, screen elements and technical items, with 8125 EG for extrusion.
View product →Polyester TPU. Polyester TPU at Shore 83 A with 8500 psi tensile strength. Injection moulded sport soles, wheels, screen elements and technical items, with 8225EG for extrusion.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 86 A with very good resistance to hydrolysis and microbial attack. Hose, cable, profile and film extrusion, with a UV stabilized 8860EUV version.
View product →Polyester TPU. Polyester TPU at Shore 90 A. Injection moulded sport soles, wheels, screen elements and technical items, with 9025EG for hose, profile, belt and film extrusion.
View product →PTMG polyether TPU. PTMG polyether TPU at Shore 88 A with very good resistance to hydrolysis and microbial attack. Tags and technical items, with 9060EG for cable, profile and film, and halogen free flame retardant versions.
View product →Polycaprolactone ester TPU. Polycaprolactone ester TPU at Shore 93 A, built for heavy duty hydraulic seals. VICAT 347 degrees F and compression set published at three conditions.
View product →Describe the system and the property you are targeting. We will point you at the right grade, send the data sheet, and ship a sample.
Request a Sample