Technipol PA 2188

Amber copolyamide hot melt for air and oil filters, 188 °C softening point, 4.0 Pa·s at 232 °C, Shore D 57 and a 5 to 6 s open time. Edge sealing to end caps.

Home › Products › Sipol › Technipol PA 2188

Technipol PA 2188 is an amber copolyamide hot-melt adhesive with a softening point of 188 °C, a Brookfield viscosity of 4.0 Pa·s at 232 °C and a Shore D hardness of 57. Sipol makes it for the automotive filter industry, in both engine air filters and engine oil filters.

In air filter manufacturing Sipol lists it for edge sealing, reinforcing beads and pre-filter element bonding. In oil filter manufacturing it is used for first and last pleat bonding and for molding ecological end caps.

Flexural modulus is 198 MPa and stress at break 26 MPa, against 61 MPa and 9.5 MPa for the softer Technipol PA 2150, with 400 percent elongation at break. Hardness is Shore D 57, settling to 51 after 15 s.

The open time is 5 to 6 s at 215 °C, which sets how quickly the pleats or the end-cap mold have to close after the melt goes down. Sipol describes a quick setting time, good flexibility, good wettability and good chemical resistance, and states more than 80 percent raw materials from non-edible renewable resources.

It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, thermoplastic polyamide adhesive, and CoPA.

Typical properties

PropertyTypical value
Softening point188 °C (Sipol method MI 13)
Brookfield viscosity4.0 Pa·s at 232 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate)
Density0.98 g/cm³ (ISO 1183)
Shore D hardness57 instantaneous, 51 after 15 s (ISO 868)
Elongation at break400 percent (ISO 527)
Stress at break26 MPa (ISO 527)
Flexural modulus198 MPa (ISO 178)
Open time5 to 6 s at 215 °C (Sipol method MI 24)
Renewable raw materialsMore than 80 percent, from non-edible renewable resources (Sipol data sheet)
ColorAmber
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Oil filter end caps

Sipol lists molding of ecological end caps in oil filter manufacturing.

Oil filter pleat bonding

First and last pleat bonding to close the pleat pack.

Air filter edge sealing

Sealing the edges of the pleated media in engine air filters.

Reinforcing beads

Reinforcing beads on the pleated media of engine air filters.

Pre-filter element bonding

Bonding the pre-filter element in air filter manufacturing.

Handling and dispersion

Sipol's suggested extrusion profile: under the hopper 50 to 80 °C, feeding zone 120 to 150 °C, compression zone 170 to 195 °C, metering zone 195 to 210 °C, die or hose 210 to 220 °C, nozzle 210 to 220 °C.

Sipol's suggested melter profile: pre-heating grid 210 to 220 °C, tank 215 to 225 °C, hose 230 to 240 °C, nozzle 230 to 240 °C.

The open time is 5 to 6 s at 215 °C, so set the pleat closing or mold closing step inside that window. Both profiles are starting points for a line trial.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 24 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

Can Technipol PA 2188 mold the end caps of an oil filter?

Yes. Sipol lists Technipol PA 2188 for molding ecological end caps in oil filter manufacturing, and for first and last pleat bonding. The grade softens at 188 °C, measures 4.0 Pa·s at 232 °C and has a flexural modulus of 198 MPa with Shore D 57. The open time is 5 to 6 s at 215 °C, which sets how fast the mold has to close on the pleat pack.

What does Technipol PA 2188 do in an engine air filter?

Sipol lists three air filter jobs for Technipol PA 2188, edge sealing, reinforcing beads and pre-filter element bonding. The same grade covers oil filter pleat bonding and end caps, so one 188 °C copolyamide can serve both lines. Melter settings run 230 to 240 °C at the hose and nozzle, and the extrusion profile ends at 210 to 220 °C.

What application temperature does Technipol PA 2188 need?

Sipol's melter profile for Technipol PA 2188 runs the pre-heating grid at 210 to 220 °C, the tank at 215 to 225 °C and the hose and nozzle at 230 to 240 °C. The extrusion profile climbs from 50 to 80 °C under the hopper to 210 to 220 °C at the die, hose and nozzle. Viscosity is 4.0 Pa·s at 232 °C. Treat both profiles as starting points.

How does Technipol PA 2188 compare with Technipol PA 2162?

Both soften at 188 °C. Technipol PA 2188 measures 4.0 Pa·s at 232 °C and Technipol PA 2162 measures 8.0 Pa·s at the same temperature, so PA 2188 flows more freely into a mold or along a pleat. PA 2188's data sheet also carries the mechanical table, the open time and the named filter operations, none of which appear on the PA 2162 sheet.

Can I get the TDS and SDS for Technipol PA 2188?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol PA 2162

Same 188 °C softening point at 8.0 Pa·s, a heavier melt.

Technipol PA 2174

Filter grade at 174 °C with a cooler melter profile.

Technipol PA 2150

Softer engine air filter grade at 150 °C and Shore D 43.

Where this grade fits

Copolyester and copolyamide hot melts

The Technipol and Technipol PA range by softening point and use.

Filter manufacturing adhesives

Air, oil and diesel filter bonding and the hot melts that do each job.

Filter hot melts: a selection guide

How to choose a hot melt for pleat, edge and end-cap bonding.

Metal-free oil filter elements

Metal-free oil filter elements and the molded hot-melt end cap.

Evaluating Technipol PA 2188?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.