Copolyamide hot melt for electronics, 186 °C softening point, 70 °C Vicat, 4.5 Pa·s at 225 °C, 500 percent elongation and UL94 V0 on its data sheet.
e-Technipol PA 3186 is an amber copolyamide hot-melt adhesive with a softening point of 186 °C, a Vicat softening temperature of 70 °C and a Brookfield viscosity of 4.5 Pa·s at 225 °C. Sipol developed it for the electrical and electronics sector, for melters, low pressure molding, potting and overmolding.
Sipol characterizes it by a high softening point and a high flexural modulus, 55 MPa. Its 70 °C Vicat temperature (ISO 306, 1 N) is the highest of the six e-Technipol PA grades listed here, and so are its stress at break, 10 MPa, and its elongation at break, 500 percent. Hardness is Shore D 40 and low-temperature flexibility reaches minus 35 °C by ASTM D3111.
It also has the strongest insulation figures of the range: a volume resistivity of 1.27 × 10¹¹ Ω·cm, a surface resistivity of 4.83 × 10¹² Ω, the lowest relative permittivity, 4.01, and the lowest dissipation factor, 0.0285. The comparative tracking index is above 600 V and the data sheet reports UL94 V0.
e-Technipol PA 3186 B is the black version, with identical typical values on its own data sheet, and other colors are available on request. Both contain more than 75 percent raw materials from non-edible renewable resources.
It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, polyamide low pressure molding material, thermoplastic polyamide adhesive, and CoPA.
| Property | Typical value |
|---|---|
| Softening point | 186 °C (Sipol method MI 13) |
| Vicat softening temperature | 70 °C (ISO 306, 1 N, 50 °C/h) |
| Low-temperature flexibility | -35 °C (ASTM D3111) |
| Linear thermal expansion, lengthwise | 225 ppm/K, 23 to 120 °C (ISO 11359) |
| Linear thermal expansion, crosswise | 245 ppm/K, 23 to 120 °C (ISO 11359) |
| Thermal conductivity | 0.229 W/(m·K) (ASTM E1461) |
| Brookfield viscosity | 4.5 Pa·s at 225 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate) |
| Shore D hardness | 40 instantaneous, 34 after 15 s (ISO 868) |
| Elongation at break | 500 percent (ISO 527) |
| Stress at break | 10 MPa (ISO 527) |
| Flexural modulus | 55 MPa (ISO 178) |
| Surface resistivity | 4.83 × 10¹² Ω at 23 °C (IEC 62631-3-1:2016) |
| Volume resistivity | 1.27 × 10¹¹ Ω·cm at 23 °C (IEC 62631-3-1:2016) |
| Relative permittivity | 4.01 (ASTM D150:2018) |
| Dielectric dissipation factor (tan δ) | 0.0285 (ASTM D150:2018) |
| Comparative tracking index (CTI) | Above 600 V (ASTM D3638:2012) |
| Density | 0.98 g/cm³ (ISO 1183) |
| Water absorption | 0.72 percent, 23 °C, 24 h immersion (Sipol method MI 08) |
| Skin time resistance at 210 °C | more than 4 h |
| Flammability | UL94 V0 (IEC 60695-11-10, -20) |
| Renewable raw materials | More than 75 percent, from non-edible renewable resources (Sipol data sheet) |
| Color | Amber; black as e-Technipol PA 3186 B; other colors on request |
| Form | Granules |
| Versions | e-Technipol PA 3186 (amber), e-Technipol PA 3186 B (black), identical typical values |
Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.
Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.
Sipol lists low pressure molding for PA 3186, at 4.5 Pa·s at 225 °C.
Named on the data sheet among the processes PA 3186 can be used in.
Sipol lists overmolding for PA 3186 alongside low pressure molding.
Melter profile from 180 to 210 °C at the pre-heating grid to 195 to 220 °C at the nozzle.
Sipol lists excellent adhesion to metals.
Excellent adhesion to polar plastic substrates, with PVC and PC named.
Sipol's suggested melter profile: pre-heating grid 180 to 210 °C, tank 190 to 210 °C, hose 195 to 220 °C, nozzle 195 to 220 °C.
Sipol's processing data cover melters only. Settings for low pressure molding, potting and overmolding depend on the mold and the machine, and are set in trials.
Sipol rates skin time resistance at 210 °C at more than 4 hours.
Package sizes: 20 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg big bags..
Storage: Stable for 24 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.
Sipol describes e-Technipol PA 3186 as solvent-free and non-toxic, and reports UL94 V0 (IEC 60695-11-10, -20) on the data sheet. Read the safety data sheet before handling.
Of the six e-Technipol PA grades listed here, e-Technipol PA 3186 has the highest Vicat softening temperature, 70 °C by ISO 306 at 1 N, against 40 to 59 °C for the others, with a 186 °C softening point. Where a molded part runs warm in service it is the grade to test first. e-Technipol PA 3188, at 59 °C Vicat and 188 °C softening point, is the alternative.
e-Technipol PA 3186 has a volume resistivity of 1.27 × 10¹¹ Ω·cm and a surface resistivity of 4.83 × 10¹² Ω at 23 °C by IEC 62631-3-1, a relative permittivity of 4.01 and a dissipation factor of 0.0285 by ASTM D150, and a comparative tracking index above 600 V by ASTM D3638. Those are the best insulation figures in the e-Technipol PA range listed here.
Sipol's melter profile for e-Technipol PA 3186 runs the pre-heating grid at 180 to 210 °C, the tank at 190 to 210 °C and the hose and nozzle at 195 to 220 °C. Viscosity is 4.5 Pa·s at 225 °C. The grade softens at 186 °C, so it needs the hotter of the two e-Technipol PA melter profiles. Low pressure molding and potting settings are set in trials.
Yes. The e-Technipol PA 3186 data sheet reports UL94 V0, tested to IEC 60695-11-10 and -20, and the black version, PA 3186 B, reports the same. The sheet does not state the specimen thickness, which a UL94 rating depends on, so ask for the test basis when the rating goes into a product approval. The grade also carries a comparative tracking index above 600 V.
Yes. We send the Technical Data Sheet (TDS) and Safety Data Sheet (SDS) on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.
Lower viscosity, 2.1 Pa·s at 210 °C, at a 188 °C softening point.
192 °C softening point and flexible to minus 45 °C.
Very low viscosity potting grade, 0.7 Pa·s at 205 °C.
The Technipol and Technipol PA range by softening point and use.
Low pressure molding, potting and overmolding, and how the e-Technipol PA grades compare.