Technipol 180 D

Copolyester hot melt for automotive air and oil filters. Melting point 183 °C, Vicat 140 °C, 47 Pa·s at 210 °C, elongation above 500%, applied by extruder.

Home › Products › Sipol › Technipol 180 D

Technipol 180 D is a copolyester hot-melt adhesive with a melting point of 183 °C and a Vicat softening point of 140 °C, designed by Sipol for the production of air and oil filters in the automotive industry. Sipol credits it with high chemical resistance to mineral oil and diesel vapors, high thermal resistance compatible with paper curing temperatures, and high elasticity that keeps the filter intact through every production step.

The 140 °C Vicat point is what sets it apart from Technipol 32, which softens at 114 °C. Vicat is the temperature at which the cooled bead starts to yield under a 1 N load, and on Technipol 180 D it sits 43 °C below the melting point.

Melt viscosity is 47 Pa·s at 210 °C and the melt flow index 27 g/10 min at 210 °C under 0.325 kg, the heaviest melt of the Sipol copolyester filter grades measured at 210 °C. Sipol recommends extruders for this grade.

Sipol's filter range lists it as the standard extrusion grade for engine oil filters, suitable for all kinds of filter paper. Sipol describes the oil filter job as joining the first and last pleats, sealing the pleats and replacing plastic or metal end caps, in service where hot oil typically runs 140 to 155 °C at 4 to 6 bar (ISO 4548-6). Sipol also states that its Technipol copolyester filter grades can be foamed.

It is also written as copolyester hot melt adhesive, co-polyester hot melt, polyester hot melt adhesive, thermoplastic copolyester adhesive, and CoPES.

Typical properties

PropertyTypical value
Density1.11 g/cm³ (ISO 1183)
Melting temperature183 °C (ISO 11357-3)
Vicat softening temperature140 °C, 1 N, 50 °C/h (ISO 306)
Elongation at breakAbove 500% (ISO 527)
Brookfield viscosity47 Pa·s at 210 °C (Brookfield CAP 2000+ cone/plate, Sipol method MI 12)
MFI27 g/10 min at 210 °C, 0.325 kg (ISO 1133)
Application methodExtruder
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Engine oil filters

Sipol lists it as the standard extrusion grade for oil filter pleat joining and sealing.

Metal-free end caps

Sipol's filter literature names replacing plastic or metal caps among the oil filter adhesive jobs.

Engine air filters

The second use Sipol designed it for, holding pleated paper and sealing edges.

Paper curing lines

Sipol rates its thermal resistance high and compatible with paper curing temperatures.

Handling and dispersion

Sipol recommends extruders for applying Technipol 180 D. The suggested profile runs 100 to 120 °C under the hopper, 140 to 160 °C in the feeding zone, 180 to 210 °C in the compression zone, 220 to 240 °C in the metering zone, and 240 to 250 °C at the extrusion die or hose and at the nozzle.

Material stored at around 5 to 10 °C or below should be held at 15 to 20 °C for at least 24 hours before it goes into the hopper.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film barrier against moisture, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 12 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material stored at around 5 to 10 °C or below should be held at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What application temperature does Technipol 180 D need?

Technipol 180 D melts at 183 °C, and Sipol's suggested extrusion profile reaches 240 to 250 °C at the die or hose and the nozzle, with 220 to 240 °C in the metering zone and 140 to 160 °C in the feeding zone. At 210 °C its Brookfield viscosity is 47 Pa·s. Sipol recommends an extruder for this grade, and the data sheet gives an extrusion profile only.

Why choose Technipol 180 D for an oil filter?

Technipol 180 D carries a Vicat softening point of 140 °C, against 114 °C for Technipol 32, and Sipol rates its thermal resistance high. Sipol's filter range lists it as the standard extrusion grade for engine oil filters, where its literature puts hot-oil service at typically 140 to 155 °C and 4 to 6 bar (ISO 4548-6). Qualify the bonded element against the filter's own test plan before release.

How does Technipol 180 D compare with Technipol 32?

Both serve automotive air and oil filters and share one extrusion profile. Technipol 180 D melts at 183 °C against 185 °C, softens later with a Vicat point of 140 °C against 114 °C, and runs a heavier melt at 47 Pa·s and 27 g/10 min against 34 Pa·s and 43 g/10 min at 210 °C. Sipol describes 32 as its very flexible extrusion grade and 180 D as high in thermal resistance and elasticity.

Can Technipol 180 D be applied from a tank melter?

Sipol recommends extruders for Technipol 180 D, and its data sheet gives only an extrusion profile, topping out at 240 to 250 °C at the die and nozzle. At 47 Pa·s at 210 °C it runs a heavier melt than Technipol 32 or Technipol 170/G at the same temperature. For a line built around a tank unit, Technipol 170/G and Technipol 157 both carry melter profiles on their data sheets.

Can I get the TDS and SDS for Technipol 180 D?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol 32

Air and oil filter grade on the same profile with a softer, more fluid melt.

Technipol 170/G

Oil and diesel filter grade with both extruder and melter profiles.

Technipol 157

Low-melting diesel filter grade at 154 °C.

Where this grade fits

Copolyester and copolyamide hot melts

The full Technipol range, by chemistry and application.

Filter manufacturing adhesives

Copolyester and copolyamide grades for air, oil and diesel filters.

Filter hot melts: a selection guide

How service temperature, medium and application method pick the grade.

Metal-free oil filter elements

How the hot melt takes over from metal end caps.

Evaluating Technipol 180 D?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.