Technipol 170/G

Copolyester hot melt for automotive oil and diesel filters. Melting point 170 °C, 36 Pa·s at 210 °C, elongation above 500%, for extruder or tank melter.

Home › Products › Sipol › Technipol 170/G

Technipol 170/G is a copolyester hot-melt adhesive with a melting point of 170 °C and elongation at break above 500%, designed by Sipol for the production of oil and diesel filters in the automotive industry. Sipol credits it with high chemical resistance to mineral oil and diesel vapors and good thermal resistance.

Brookfield viscosity is 36 Pa·s at 210 °C and the melt flow index 40 g/10 min at 210 °C under 0.325 kg. The data sheet gives both an extruder profile and a melter profile, so the grade runs on either kind of line.

Sipol's filter range also lists Technipol 170/G as a standard grade for engine air filters, suitable for all kinds of filter paper and applied by extruder or tank unit. Sipol states that its Technipol copolyester filter grades can be foamed.

Its 170 °C melting point sits between Technipol 157, the diesel filter grade at 154 °C, and Technipol 32 and 180 D, the air and oil filter grades at 185 °C and 183 °C.

It is also written as copolyester hot melt adhesive, co-polyester hot melt, polyester hot melt adhesive, thermoplastic copolyester adhesive, and CoPES.

Typical properties

PropertyTypical value
Density1.27 g/cm³ (ISO 1183)
Melting temperature170 °C (ISO 11357-3)
Elongation at breakAbove 500% (ISO 527)
Brookfield viscosity36 Pa·s at 210 °C (Brookfield CAP 2000+ cone/plate, Sipol method MI 12)
MFI40 g/10 min at 210 °C, 0.325 kg (ISO 1133)
Application methodExtruder or tank melter
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Engine oil filters

One of the two uses Sipol designed the grade for, with high resistance to mineral oil.

Diesel fuel filters

The second designed use, rated for high resistance to diesel vapors.

Engine air filters

Listed in Sipol's filter range as a standard grade for all kinds of filter paper.

Tank-melter lines

The data sheet gives a melter profile with a 210 to 220 °C tank.

Handling and dispersion

For extrusion, Sipol suggests 60 to 80 °C under the hopper, 120 to 150 °C in the feeding zone, 170 to 190 °C in the compression zone, 180 to 210 °C in the metering zone, and 200 to 220 °C at the extrusion die or hose and at the nozzle.

For melters, Sipol suggests a pre-heating grid at 180 to 190 °C, the tank at 210 to 220 °C, and the hose and nozzle at 220 to 230 °C.

Material stored at around 5 to 10 °C or below should be held at 15 to 20 °C for at least 24 hours before use.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film barrier against moisture, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 12 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material stored at around 5 to 10 °C or below should be held at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What temperatures does Technipol 170/G run at?

Technipol 170/G melts at 170 °C. On an extruder Sipol suggests 180 to 210 °C in the metering zone and 200 to 220 °C at the die or hose and nozzle. On a melter Sipol suggests a 180 to 190 °C pre-heating grid, a 210 to 220 °C tank and 220 to 230 °C at the hose and nozzle. Brookfield viscosity is 36 Pa·s at 210 °C.

Can Technipol 170/G run from a tank melter?

Yes. Technipol 170/G is one of the Sipol copolyester filter grades whose data sheet gives a melter profile as well as an extruder profile, with the tank at 210 to 220 °C. Sipol's filter range describes it as a standard grade that can go through both extruder and tank unit. Technipol 32 and Technipol 180 D are recommended for extruders only.

How does Technipol 170/G compare with Technipol 157?

Technipol 170/G melts at 170 °C and is designed for oil and diesel filters; Technipol 157 melts at 154 °C and is designed for diesel filters. Both carry Sipol's rating of high resistance to mineral oil and diesel vapors and good thermal resistance. 170/G runs its melter tank at 210 to 220 °C against 180 to 190 °C for 157, and its density is 1.27 against 1.25 g/cm³.

Is Technipol 170/G used in air filters?

Sipol's data sheet for Technipol 170/G names oil and diesel filters. Sipol's filter range also lists it as a standard engine air filter grade, suitable for all kinds of paper and applied by extruder or tank unit. Its melting point of 170 °C and 36 Pa·s at 210 °C sit below Technipol 32 and Technipol 180 D, the two copolyester grades Sipol designed for air and oil filters.

Can I get the TDS and SDS for Technipol 170/G?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol 157

Low-melting diesel filter grade at 154 °C, for extruder, melter or spray.

Technipol 180 D

Air and oil filter grade with a Vicat point of 140 °C, extruder only.

Technipol 32

Very flexible air and oil filter grade at 185 °C.

Where this grade fits

Copolyester and copolyamide hot melts

The full Technipol range, by chemistry and application.

Filter manufacturing adhesives

Copolyester and copolyamide grades for air, oil and diesel filters.

Filter hot melts: a selection guide

How service temperature, medium and application method pick the grade.

Metal-free oil filter elements

How the hot melt takes over from metal end caps.

Evaluating Technipol 170/G?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.