Technipol PA 2167

Amber copolyamide hot melt for the automotive filter industry, 172 °C softening point and 3.5 Pa·s at 232 °C. Quick setting, with extrusion and melter profiles.

Home › Products › Sipol › Technipol PA 2167

Technipol PA 2167 is an amber copolyamide hot-melt adhesive with a softening point of 172 °C and a Brookfield viscosity of 3.5 Pa·s at 232 °C. Sipol makes it for the automotive filter industry.

Sipol describes a quick setting time with good flexibility, wettability and chemical resistance. Its 3.5 Pa·s at 232 °C compares with 4.0 Pa·s for Technipol PA 2188 and 8.0 Pa·s for Technipol PA 2162 at the same temperature, so it lays down the most fluid bead of the three.

The data sheet gives both an extrusion and a melter profile. The melter runs relatively flat, 185 to 195 °C at the pre-heating grid and 190 to 210 °C through tank, hose and nozzle.

More than 80 percent of its raw materials come from renewable, non-edible resources, according to Sipol.

It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, thermoplastic polyamide adhesive, and CoPA.

Typical properties

PropertyTypical value
Softening point172 °C (Sipol method MI 13)
Brookfield viscosity3.5 Pa·s at 232 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate)
Density0.98 g/cm³ (ISO 1183)
Renewable raw materialsMore than 80 percent, from non-edible renewable resources (Sipol data sheet)
ColorAmber
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Automotive filters

The industry Sipol makes PA 2167 for.

Extruder application

Sipol's extrusion profile runs from 50 to 80 °C under the hopper to 190 to 210 °C at the nozzle.

Tank-unit application

Melter profile at 190 to 210 °C through tank, hose and nozzle.

Chemically exposed bond lines

Sipol lists good chemical resistance among the grade's properties.

Handling and dispersion

Sipol's suggested extrusion profile: under the hopper 50 to 80 °C, feeding zone 110 to 140 °C, compression zone 150 to 170 °C, metering zone 180 to 200 °C, die or hose 180 to 200 °C, nozzle 190 to 210 °C.

Sipol's suggested melter profile: pre-heating grid 185 to 195 °C, tank 190 to 210 °C, hose 190 to 210 °C, nozzle 190 to 210 °C.

Both profiles are starting points. Equipment, bead size and line speed move the final settings.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 24 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What temperatures does Technipol PA 2167 run at?

Sipol's melter profile for Technipol PA 2167 puts the pre-heating grid at 185 to 195 °C and the tank, hose and nozzle at 190 to 210 °C. The extrusion profile climbs from 50 to 80 °C under the hopper to 190 to 210 °C at the nozzle. The grade softens at 172 °C and measures 3.5 Pa·s at 232 °C. Treat both profiles as starting points for a line trial.

How does Technipol PA 2167 compare with Technipol PA 2174?

Technipol PA 2167 softens at 172 °C and measures 3.5 Pa·s at 232 °C. Technipol PA 2174 softens at 174 °C and measures 4.0 Pa·s at 205 °C. The extrusion profiles are identical; the melter profiles differ, with PA 2174 running its tank at 200 to 210 °C and its hose and nozzle at 210 to 220 °C. Both are described by Sipol for the automotive filter industry.

Is Technipol PA 2167 the same as Technipol PA 167?

The two data sheets give the same core values for Technipol PA 2167 and Technipol PA 167, a 172 °C softening point and 3.5 Pa·s at 232 °C, with more than 80 percent renewable raw materials. Sipol positions PA 2167 for the automotive filter industry in granules, and PA 167 as a rod cement for lasting machines in footwear. Order by the grade named for your use.

Can I get the TDS and SDS for Technipol PA 2167?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol PA 2174

Automotive filter grade at 174 °C softening point and 4.0 Pa·s at 205 °C.

Technipol PA 2162

Higher-softening filter grade at 188 °C and 8.0 Pa·s at 232 °C.

Technipol PA 167

Same core values, supplied as rod for footwear lasting machines.

Where this grade fits

Copolyester and copolyamide hot melts

The Technipol and Technipol PA range by softening point and use.

Filter manufacturing adhesives

Air, oil and diesel filter bonding and the hot melts that do each job.

Filter hot melts: a selection guide

How to choose a hot melt for pleat, edge and end-cap bonding.

Evaluating Technipol PA 2167?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.