Technipol PA 167

Copolyamide rod cement for automatic lasting machines, 172 °C softening point, 3.5 Pa·s at 232 °C, applied at 220 to 240 °C. Rod of 3.8, 3.9 or 4.2 mm.

Home › Products › Sipol › Technipol PA 167

Technipol PA 167 is an amber copolyamide hot melt extruded into rod, with a softening point of 172 °C and a Brookfield viscosity of 3.5 Pa·s at 232 °C. Sipol makes it for the automatic lasting machines of the footwear industry, with an indicative application temperature of 220 to 240 °C.

Sipol credits it with a quick setting time, good flexibility, excellent wettability and high adhesion to leather and to both synthetic and regenerated materials. Footwear constructions vary widely, and Sipol recommends preliminary trials to approve the grade on the actual materials.

At 3.5 Pa·s the melt is fluid at application temperature, less than half the 8.0 Pa·s of Technipol PA 162 at the same 232 °C, and the 172 °C softening point is 16 °C lower. That makes PA 167 the more free-flowing of Sipol's two copolyamide lasting rods.

Four versions exist. PA 167 is rod of 3.9 mm, PA 167 S is rod of 3.8 mm, PA 167-4.2 is rod of 4.2 mm, and PA 167/G is the same polymer in granules, mainly used as raw material for extruding the rod. All four state more than 80 percent raw materials from non-edible renewable resources.

It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, polyamide rod cement, thermoplastic polyamide adhesive, and CoPA.

Typical properties

PropertyTypical value
Softening point172 °C (Sipol method MI 13)
Brookfield viscosity3.5 Pa·s at 232 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate)
Indicative application temperature220 to 240 °C (rod versions)
Density0.98 g/cm³ (ISO 1183)
Rod diameter3.9 ± 0.1 mm (PA 167), 3.8 ± 0.1 mm (PA 167 S), 4.2 ± 0.1 mm (PA 167-4.2)
Renewable raw materialsMore than 80 percent, from non-edible renewable resources (Sipol data sheet)
ColorAmber
FormRod on reels (PA 167, PA 167 S, PA 167-4.2), granules (PA 167/G)
VersionsPA 167 (3.9 mm rod), PA 167 S (3.8 mm rod), PA 167-4.2 (4.2 mm rod), PA 167/G (granules for rod extrusion)

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Automatic lasting machines

The rod cement Sipol makes PA 167 for.

Leather

Sipol lists high adhesion to leather.

Synthetic and regenerated materials

Sipol lists high adhesion to both, for mixed-material shoe constructions.

Rod extrusion

PA 167/G granules are mainly used as raw material for extruding the rod cement.

Handling and dispersion

Sipol gives an indicative application temperature of 220 to 240 °C for the rod versions, and measures viscosity at 232 °C, inside that window. Set the lasting machine within it and confirm the setting in trials.

Sipol recommends preliminary trials to approve PA 167, given the wide variety of materials used in footwear construction.

Packaging, storage, and regulatory status

Package sizes: Rod in 25 kg net cardboard boxes of 12 reels, around 1.67 kg each. PA 167/G granules in 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: PA 167 and PA 167-4.2 rod are stable for 18 months, and PA 167 S rod and PA 167/G granules for 24 months, unopened in the original packaging, in a cool, dry place protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What application temperature does Technipol PA 167 need?

Sipol gives Technipol PA 167 rod an indicative application temperature of 220 to 240 °C. The rod softens at 172 °C and measures 3.5 Pa·s at 232 °C, so it is fluid across the whole window. Sipol recommends preliminary trials on the actual shoe materials to confirm the setting, given the variety of constructions in use.

Which version of Technipol PA 167 should I order?

Order Technipol PA 167 by rod diameter. PA 167 is 3.9 ± 0.1 mm, PA 167 S is 3.8 ± 0.1 mm and PA 167-4.2 is 4.2 ± 0.1 mm, all with the same 172 °C softening point and 3.5 Pa·s at 232 °C, on reels of around 1.67 kg. PA 167/G is the granular form, mainly used as raw material for extruding the rod.

How does Technipol PA 167 compare with Technipol PA 162?

Technipol PA 167 softens at 172 °C and measures 3.5 Pa·s at 232 °C. Technipol PA 162 softens at 188 °C and measures 8.0 Pa·s at the same temperature, a heavier melt. Both are lasting rods with high adhesion to leather and synthetic and regenerated materials. Sipol names PA 162 specifically for toe lasting machines equipped with tracers.

Is Technipol PA 167 the same as Technipol PA 2167?

The data sheets give Technipol PA 167 and Technipol PA 2167 the same 172 °C softening point and 3.5 Pa·s at 232 °C, with more than 80 percent renewable raw materials. Sipol positions PA 167 as a rod cement for footwear lasting and PA 2167 in granules for the automotive filter industry. Order by the grade named for your use.

Can I get the TDS and SDS for Technipol PA 167?

Yes. We send the Technical Data Sheet (TDS) and Safety Data Sheet (SDS) on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol PA 162

Lasting rod at 188 °C, designed for toe lasters with tracers.

Technipol PA/G

Footwear grade for automatic thermofolding machines, 110 °C softening point.

Technipol PA 132

Granular shoe-industry grade at 138 °C for melter or extruder.

Where this grade fits

Copolyester and copolyamide hot melts

The Technipol and Technipol PA range by softening point and use.

Footwear hot-melt adhesives

Lasting rod, folding and shoe-assembly hot melts and how to choose between them.

Evaluating Technipol PA 167?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.