Technipol PA 2132

Amber copolyamide hot melt, 138 °C softening point and 6.5 Pa·s at 190 °C. Developed for the automotive filter industry, with extrusion and melter profiles.

Home › Products › Sipol › Technipol PA 2132

Technipol PA 2132 is an amber copolyamide hot-melt adhesive with a softening point of 138 °C and a Brookfield viscosity of 6.5 Pa·s at 190 °C. Sipol developed it principally for the automotive filter industry.

Sipol credits it with good flexibility and wettability, and with adhesion to leather, wood, cardboard and porous substrates.

The data sheet gives both an extrusion profile and a melter profile, so the grade can run from an extruder or a tank unit. The melter profile runs the hose and nozzle at 200 to 210 °C, well above the 138 °C softening point.

Around 60 percent of its raw materials come from renewable, non-edible resources, according to Sipol.

It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, thermoplastic polyamide adhesive, and CoPA.

Typical properties

PropertyTypical value
Softening point138 °C (Sipol method MI 13)
Brookfield viscosity6.5 Pa·s at 190 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate)
Density0.98 g/cm³ (ISO 1183)
Renewable raw materialsAround 60 percent, from non-edible renewable resources (Sipol data sheet)
ColorAmber
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Automotive filters

The industry Sipol principally developed PA 2132 for.

Cardboard and paper bonding

Sipol lists adhesion to cardboard and porous substrates.

Wood and leather

Both named on the data sheet as substrates PA 2132 bonds.

Extruder or melter lines

Sipol publishes a temperature profile for each method.

Handling and dispersion

Sipol's suggested extrusion profile: under the hopper 50 to 80 °C, feeding zone 100 to 130 °C, compression zone 150 to 170 °C, metering zone 170 to 190 °C, die or hose 170 to 190 °C, nozzle 180 to 200 °C.

Sipol's suggested melter profile: pre-heating grid 165 to 175 °C, tank 190 to 200 °C, hose 200 to 210 °C, nozzle 200 to 210 °C.

Both profiles are starting points. Equipment, bead size and line speed move the final settings.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 24 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What temperatures does Technipol PA 2132 need?

Technipol PA 2132 softens at 138 °C and measures 6.5 Pa·s at 190 °C. Sipol's melter profile runs the pre-heating grid at 165 to 175 °C, the tank at 190 to 200 °C and the hose and nozzle at 200 to 210 °C. On an extruder the profile climbs from 50 to 80 °C under the hopper to 180 to 200 °C at the nozzle. Treat both as starting points for a line trial.

Which substrates does Technipol PA 2132 bond?

Sipol lists adhesion of Technipol PA 2132 to leather, wood, cardboard and porous substrates, with good flexibility and wettability. In automotive filters, the industry Sipol developed it for, that covers filter paper and cardboard components. The data sheet names no metal or plastic substrates, so test any non-porous part before committing to the grade.

How does Technipol PA 2132 compare with Technipol PA 132?

The two data sheets give the same typical values. Technipol PA 2132 and Technipol PA 132 both soften at 138 °C, measure 6.5 Pa·s at 190 °C, and carry the same extrusion and melter profiles and around 60 percent renewable raw materials. Sipol positions PA 2132 for the automotive filter industry and PA 132 for the shoe industry, so order the grade named for your application.

How does it compare with Technipol PA 2126?

Technipol PA 2132 softens at 138 °C against 131 °C for Technipol PA 2126, and measures 6.5 Pa·s at 190 °C against 5 Pa·s. Sipol names PA 2126 for engine air filters with media that skips the curing oven, and gives it a melter profile only. PA 2132 carries both an extrusion and a melter profile.

Can I get the TDS and SDS for Technipol PA 2132?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol PA 2126

Lower-softening air filter grade at 131 °C, melter application.

Technipol PA 2150

Engine air filter grade at 150 °C with a full mechanical property table.

Technipol PA 132

Same typical values, positioned by Sipol for the shoe industry.

Where this grade fits

Copolyester and copolyamide hot melts

The Technipol and Technipol PA range by softening point and use.

Filter manufacturing adhesives

Air, oil and diesel filter bonding and the hot melts that do each job.

Filter hot melts: a selection guide

How to choose a hot melt for pleat, edge and end-cap bonding.

Evaluating Technipol PA 2132?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.