Technipol PA 2126

Amber copolyamide hot melt, 131 °C softening point and 5 Pa·s at 190 °C. Quick setting at a low application temperature, for engine air filters with uncured media.

Home › Products › Sipol › Technipol PA 2126

Technipol PA 2126 is an amber copolyamide hot-melt adhesive with a softening point of 131 °C and a Brookfield viscosity of 5 Pa·s at 190 °C. Sipol developed it mainly for engine air filters whose filtering media does not need to pass through a curing oven.

Sipol describes the grade as quick setting with a low application temperature. The suggested melter profile tops out at 180 to 190 °C at the nozzle, so the adhesive reaches the media with less heat behind it than the higher-softening filter grades need.

At 5 Pa·s the melt is fluid at the nozzle, which suits bead application from a tank unit. The data sheet gives a melter profile only, with no extrusion profile.

Around 70 percent of its raw materials come from renewable, non-edible resources, according to Sipol.

It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, thermoplastic polyamide adhesive, and CoPA.

Typical properties

PropertyTypical value
Softening point131 °C (Sipol method MI 13)
Brookfield viscosity5 Pa·s at 190 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate)
Density0.98 g/cm³ (ISO 1183)
Renewable raw materialsAround 70 percent, from non-edible renewable resources (Sipol data sheet)
ColorAmber
FormGranules

Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.

Need this in your system?

Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.

Applications

Engine air filters

The main use Sipol developed PA 2126 for.

Filter media without oven curing

Designed for air filter media that does not pass through a curing oven after bonding.

Tank-unit bead application

Sipol gives a melter profile with the tank at 175 to 185 °C and the nozzle at 180 to 190 °C.

Handling and dispersion

Sipol's suggested melter profile runs the pre-heating grid at 170 to 180 °C, the tank at 175 to 185 °C, the hose at 175 to 185 °C and the nozzle at 180 to 190 °C.

Treat the profile as a starting point. Melter design, hose length and line speed all move the settings that give the right bead.

Packaging, storage, and regulatory status

Package sizes: 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..

Storage: Stable for 24 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.

Read the safety data sheet before handling.

Frequently asked questions

What application temperature does Technipol PA 2126 run at?

Sipol's suggested melter profile for Technipol PA 2126 is 170 to 180 °C at the pre-heating grid, 175 to 185 °C in the tank and hose, and 180 to 190 °C at the nozzle. The grade softens at 131 °C and measures 5 Pa·s at 190 °C, so it is fluid at nozzle temperature without running the melter hot. Melter design and line speed move these figures, so treat them as a starting point for line trials.

Which filters is Technipol PA 2126 made for?

Sipol developed Technipol PA 2126 mainly for engine air filters whose filtering media does not need to pass through a curing oven. It softens at 131 °C and Sipol describes it as quick setting with a low application temperature. Where the bonded element sees more heat, look at the higher-softening grades, Technipol PA 2150 at 150 °C and Technipol PA 2188 at 188 °C, and confirm the choice with a line trial.

How does Technipol PA 2126 compare with Technipol PA 2132?

Technipol PA 2126 softens at 131 °C and measures 5 Pa·s at 190 °C. Technipol PA 2132 softens at 138 °C and measures 6.5 Pa·s at the same temperature, and Sipol gives both an extrusion and a melter profile for it, with the tank at 190 to 200 °C. PA 2126 is the grade Sipol names for air filters with uncured media; PA 2132 is described for the automotive filter industry in general.

How much of Technipol PA 2126 comes from renewable resources?

Sipol states that Technipol PA 2126 contains around 70 percent raw materials from renewable, non-edible resources. The data sheet gives no ASTM D6866 measurement for this grade, so the figure is Sipol's raw-material share. Technipol PA 2150 is the filter grade whose data sheet carries a measured value, 86 percent bio-based carbon by ASTM D6866.

Can I get the TDS and SDS for Technipol PA 2126?

Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), and IMDS data on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.

Related products

Technipol PA 2132

Filter copolyamide at 138 °C softening point, with extrusion and melter profiles.

Technipol PA 2150

Engine air filter grade at 150 °C, with a full mechanical property table.

Technipol PA 2188

The 188 °C filter grade for edge sealing, pleat bonding and end caps.

Where this grade fits

Copolyester and copolyamide hot melts

The Technipol and Technipol PA range by softening point and use.

Filter manufacturing adhesives

Air, oil and diesel filter bonding and the hot melts that do each job.

Filter hot melts: a selection guide

How to choose a hot melt for pleat, edge and end-cap bonding.

Evaluating Technipol PA 2126?

Tell us the system you are formulating and the property you need to hit. We will confirm the grade, send the data sheet, and ship a sample.