Biodegradable hot melt (PBSe) for toe puffs, counters and heat-sensitive textiles. Melting point 64 °C, applied at 120 to 160 °C, over 60% renewable content.
Technipol Bio 707 is a totally biodegradable thermoplastic adhesive, listed by Sipol as PBSe, with a melting point of 64 °C and an indicative application temperature of 120 to 160 °C. More than 60% of its raw materials come from renewable, inedible-grade resources.
Sipol makes it for footwear, where it goes into toe puff and counter production, and for textiles, where it bonds substrates that are sensitive to medium-high temperatures. It also serves as a base material for compounds extruded or molded into biodegradable products.
The adhesive is applied at 120 to 160 °C, against 230 to 240 °C for Sipol's Technipol 170 lasting rod, and its Vicat softening point is 58 °C. Shore D hardness is 54, stress at break 16 MPa and elongation at break 370%.
Technipol Bio 709 is the same grade with more than 95% of its raw materials from renewable, inedible-grade resources, on the same property table.
No organo-tin compounds are used in manufacturing either grade, and Sipol issues a declaration of the total absence of tin compounds on request. Sipol also states that its Technipol Bio grades comply with both European and US food contact regulations.
It is also written as PBSe, biodegradable hot melt adhesive, biodegradable copolyester, copolyester hot melt adhesive, polyester hot melt adhesive, thermoplastic copolyester adhesive, and CoPES.
| Property | Typical value |
|---|---|
| Melting temperature | 64 °C (ISO 11357-3) |
| Crystallization temperature | 42 °C (ISO 11357-3) |
| Glass transition temperature | -47 °C (ISO 11357-2) |
| Indicative application temperature | 120 to 160 °C |
| Vicat softening temperature | 58 °C, A/50 (ISO 306) |
| MFI | 30 g/10 min at 150 °C, 2.16 kg (ISO 1133) |
| MVR | 27 cm³/10 min at 150 °C, 2.16 kg (ISO 1133) |
| Shore D hardness | 54 instantaneous, 52 after 15 s (ISO 868) |
| Stress at break | 16 MPa (ISO 527) |
| Elongation at break | 370% (ISO 527) |
| Flexural modulus | 288 MPa (ISO 178) |
| Abrasion resistance | 96 mm³, vertical load 5 N (ISO 4649) |
| Izod impact, notched, 23 °C | 23 J/m (ISO 180) |
| Izod impact, notched, -40 °C | 28 J/m (ISO 180) |
| Compression set, 23 °C | 33% (ISO 815:1991) |
| Compression set, 70 °C | 46% (ISO 815:1991) |
| Density | 1.13 g/cm³ (ISO 1183) |
| Water absorption | 0.33%, 23 °C for 24 h immersion (Sipol method MI 08) |
| Renewable content | Bio 707 above 60%; Bio 709 above 95% (inedible-grade sources) |
| Form | Granules |
| Versions | Technipol Bio 707; Technipol Bio 709, higher renewable content |
Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.
Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.
Sipol names toe puff production among the footwear uses.
Counter production is the second footwear use on the data sheet.
Bonds textile substrates that do not tolerate medium-high temperatures, applied at 120 to 160 °C.
Base material for compounds extruded or molded into biodegradable products.
Dry before processing at 40 °C for 2 to 3 hours in a dehumidifying dryer, to a processing moisture content of 0.15%.
As an adhesive, Sipol gives an indicative application temperature of 120 to 160 °C.
For injection molding, Sipol suggests 45 °C at the rear zone, 55 °C at the center zone, 60 °C at the front zone and 65 °C at the nozzle, with the mold at 20 to 30 °C. For extrusion, it suggests 50 to 60 °C in the feeding zone, 60 to 80 °C in the compression zone, and 80 to 100 °C in the metering zone and at the head and die.
Package sizes: 25 kg bags with an aluminum film barrier against moisture, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..
Storage: Stable for 6 months unopened in the original packaging, kept in a cool, dry place and protected from light. Material stored at around 5 to 10 °C or below should be held at 15 to 20 °C for at least 24 hours before use.
No organo-tin compounds are used in manufacturing Technipol Bio 707 or 709, and Sipol provides a declaration of the total absence of tin compounds on request. Sipol states that its Technipol Bio grades comply with both European and US food contact regulations. Read the safety data sheet before handling.
Technipol Bio 707 melts at 64 °C and Sipol gives an indicative application temperature of 120 to 160 °C. Its melt flow index is 30 g/10 min at 150 °C under 2.16 kg. Sipol lists it for bonding textile substrates sensitive to medium-high temperatures. Dry the granules at 40 °C for 2 to 3 hours in a dehumidifying dryer before use.
Renewable content. More than 60% of the raw materials in Technipol Bio 707 come from renewable, inedible-grade resources; Technipol Bio 709 raises that to more than 95%. The two share one property table, a 64 °C melting point, 120 to 160 °C application temperature, Shore D 54 and 30 g/10 min at 150 °C, and both are tin-free with a declaration on request.
Sipol describes Technipol Bio 707 as totally biodegradable, and its data sheet states no OK Compost certification. For a resin with OK Compost INDUSTRIAL, HOME and SOIL certification by TÜV Austria, Sipol's Technipol Bio 1120 and Bio 1160 data sheets state all three. Ask for the documentation that matches the end-of-life claim the finished product will carry.
Yes. Sipol states that no organo-tin compounds are used in manufacturing Technipol Bio 707 or Bio 709, and it issues a declaration of the total absence of tin compounds on request. Add the tin-free declaration to the document request with the data sheet and safety data sheet when a restricted-substances list for footwear or textiles asks for it.
Yes. We send the Technical Data Sheet (TDS), Safety Data Sheet (SDS), Tin-free declaration, and Food contact declaration (EU and US) on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.
White copolyester rod cement for automatic lasting machines, applied at 230 to 240 °C.
Certified compostable aliphatic grade at 114 °C.
The Technipol Bio range and its certifications.
PET carriers and compostable carriers side by side.
Lasting rods, folding grades and toe puff adhesives.