Technipol copolyester and copolyamide rod cement for automatic lasting machines, thermofolding granules and a biodegradable hot melt for toe puffs and counters. Solvent-free, in 3.9 and 4.2 mm rod.
Technipol rod cements are copolyester and copolyamide hot-melt adhesives extruded into rod for automatic toe and seat lasting machines. They set in seconds, stay flexible in the finished shoe and bond leather, synthetic and regenerated uppers with no solvent and no VOC.
Sipol makes the rod and the granules it is extruded from, alongside thermofolding granules and a biodegradable hot melt for toe puffs and counters. P.A.T. Products supplies the range to shoe factories and rod extruders across the United States, Canada and Mexico.
White rod, 3.9 mm, melting point 170 °C and an indicative application temperature of 230 to 240 °C. Sipol credits it with a quick setting time that lets the blades close fast, and with adhesion across a wide range of upper materials. Technipol 170/N cuts the open time further for faster lines.
Amber rod in 3.9 mm and 4.2 mm, softening at 188 °C and 172 °C. Both work on lasting machines with tracers, PA 162 was designed for the newer toe lasting machines, and both carry more than 80 percent renewable raw materials. They are softer and more elastic in the finished joint.
Every footwear construction is different. Sipol's data sheets recommend preliminary trials on the actual uppers, linings and insoles before a grade is homologated, and we will arrange the trial material.
| Grade | Chemistry | Melting or softening point | Form | Sipol's stated use |
|---|---|---|---|---|
| Technipol 170 | Copolyester, white | 170 °C melting | Rod, 3.9 mm | Rod cement for automatic lasting machines; 170/N has a very short open time |
| Technipol PA 167 | Copolyamide, amber | 172 °C softening | Rod, 3.9 or 4.2 mm; granules (167/G) | Rod cement for automatic lasting machines |
| Technipol PA 162 | Copolyamide, amber | 188 °C softening | Rod, 3.9 or 4.2 mm; granules (162/G) | Rod cement, also for toe lasting machines with tracers |
| Technipol PA/G | Copolyamide, amber | 110 °C softening | Granules | Automatic thermofolding machines |
| Technipol PA 132 | Copolyamide, amber | 138 °C softening | Granules | Shoe bonding on leather, wood and board |
| Technipol Bio 707 | Biodegradable copolyester | 64 °C melting | Granules | Toe puffs and counters |
Tell us the machine, the rod diameter and the upper materials. We will match the rod and get trial reels to you.
Request a SampleTechnipol PA/G is a copolyamide in granules for automatic thermofolding machines. It softens at 110 °C, sets very quickly to speed up folding, and carries more than 80 percent renewable raw materials.
Technipol PA/G →Technipol Bio 707 is a fully biodegradable copolyester hot melt that melts at 64 °C and applies at 120 to 160 °C. Sipol lists toe-puff and counter production as its footwear use, and it carries more than 60 percent renewable raw materials.
Technipol Bio 707 →Technipol 171, PA 162/G and PA 167/G are the granule versions used as raw material to extrude rod cement, for rod makers who run their own lines.
Technipol 170 rod ships in 25 kg cartons of 12 reels of about 2.08 kg. Granules ship in 25 kg aluminum-barrier bags, 500 kg lined octabins, or 500 kg and 1000 kg big bags. Product keeps 12 months unopened in a cool, dry place, and material stored at 5 to 10 °C should sit at 15 to 20 °C for 24 hours before use.
No organo-tin compounds are used in making Technipol 170 or Technipol Bio 707, and Sipol issues a tin-free declaration for each on request. TDS and SDS are available for every grade.
Toe lasting machines run a hot-melt rod cement fed through the machine and applied as the upper is pulled over the last. Technipol 170 is a white copolyester rod, 3.9 mm, that melts at 170 °C and applies at 230 to 240 °C. Technipol PA 162 is an amber copolyamide rod, softening at 188 °C, designed also for the newer toe lasting machines with tracers.
Technipol 170, PA 162 and PA 167 come as 3.9 mm rod (3.9 ± 0.1 mm on the data sheet). PA 162 and PA 167 also come in a 4.2 mm version. Technipol 170 rod ships in 25 kg cartons holding 12 reels of about 2.08 kg.
Technipol 170 copolyester sets quickly so the blades can close fast and adheres to a wide range of upper materials. Technipol PA 162 and PA 167 copolyamides are softer and more elastic in the joint, run on lasting machines with tracers and carry more than 80 percent renewable raw materials. Sipol recommends a trial on the factory's own uppers before either grade is homologated.
Sipol states that no organo-tin compounds are used in manufacturing Technipol 170 or Technipol Bio 707, and it issues a declaration of the total absence of tin compounds for each on request.
Yes. Technipol Bio 707 is a fully biodegradable copolyester hot melt with a 64 °C melting point and an indicative application temperature of 120 to 160 °C. Sipol lists toe-puff and counter production among its uses, along with bonding heat-sensitive textiles.