Amber copolyamide hot melt with high viscosity and a low softening point, 112 °C and 74 Pa·s at 160 °C. Very good flexibility. Also offered as PA 2110 and e-PA 7110.
Technipol PA 7110 is an amber copolyamide hot-melt adhesive with a softening point of 112 °C and a Brookfield viscosity of 74 Pa·s at 160 °C. Sipol characterizes it by high viscosity, a low softening point and very good flexibility.
It softens at a low temperature, yet at 160 °C it is an order of magnitude more viscous than Sipol's filter and footwear copolyamides, which measure 2.4 to 8.0 Pa·s, most of them at 190 to 232 °C. A low softening point keeps the application temperature down for heat-sensitive substrates.
Sipol's data sheet names no specific end use. For heat-shrink tubing and sleeve production the grade Sipol names is Technipol PA 7115, which adds adhesion data for polyethylene and polypropylene. Send the substrate and the process and we will check the fit of PA 7110 with Sipol.
The same polymer is offered under three names with identical typical values. Technipol PA 2110 keeps 24 months in storage; Technipol PA 7110 and e-Technipol PA 7110 keep 12 months. All three state more than 80 percent raw materials from non-edible renewable resources.
It is also written as copolyamide hot melt adhesive, co-polyamide hot melt, polyamide hot melt adhesive, thermoplastic polyamide adhesive, and CoPA.
| Property | Typical value |
|---|---|
| Softening point | 112 °C (Sipol method MI 13) |
| Brookfield viscosity | 74 Pa·s at 160 °C (Sipol method MI 12, Brookfield CAP 2000+ cone and plate) |
| Density | 0.98 g/cm³ (ISO 1183) |
| Renewable raw materials | More than 80 percent, from non-edible renewable resources (Sipol data sheet) |
| Color | Amber |
| Form | Granules |
| Versions | Technipol PA 7110, Technipol PA 2110, e-Technipol PA 7110 (identical typical values) |
Typical values from the manufacturer's technical data sheet. They describe the product, they are not a specification. We will send the current TDS and the batch documentation your qualification needs.
Tell us the part or the process, the property you are targeting, and the volume you expect. We will confirm the grade, send the documentation, and get a sample of the candidate grade to you.
74 Pa·s at 160 °C, against 2.4 Pa·s for Technipol PA/G at the same temperature.
A 112 °C softening point for substrates that cannot take a hotter melt.
Sipol lists very good flexibility among the grade's defining properties.
The data sheet gives viscosity at 160 °C and no machine profile. At 74 Pa·s the melt needs equipment rated for high-viscosity hot melts; confirm the application temperature in a trial on the actual line.
Package sizes: 25 kg bags with an aluminum film moisture barrier, 500 kg cardboard octabins with an inner PE liner, and 500 kg and 1000 kg big bags..
Storage: Stable for 12 months (Technipol PA 7110, e-Technipol PA 7110) or 24 months (Technipol PA 2110) unopened in the original packaging, kept in a cool, dry place and protected from light. Material held at around 5 to 10 °C or below should stand at 15 to 20 °C for at least 24 hours before use.
Read the safety data sheet before handling.
Their data sheets give identical typical values, a 112 °C softening point, 74 Pa·s at 160 °C, 0.98 g/cm³ density, amber color and more than 80 percent renewable raw materials, with the same packaging. The one difference is shelf life, 24 months for Technipol PA 2110 against 12 months for Technipol PA 7110 and e-Technipol PA 7110. Quote the name your specification uses.
The Technipol PA 7110 data sheet names no end use. The grade Sipol names for heat-shrink tubing and heat-shrink sleeve production is Technipol PA 7115, which softens at 120 °C, measures 100 Pa·s at 160 °C, and is described with very high adhesion to non-polar substrates such as PE and PP. Start a heat-shrink inquiry from PA 7115.
Technipol PA 7110 measures 74 Pa·s at 160 °C. Sipol's filter and footwear copolyamides measure between 2.4 and 8.0 Pa·s, most of them at 190 to 232 °C, and Technipol PA/G, the other low-softening grade, measures 2.4 Pa·s at the same 160 °C. PA 7110 is about thirty times more viscous at that temperature. Technipol PA 7115 runs heavier still, at 100 Pa·s at 160 °C.
Yes. We send the Technical Data Sheet (TDS) and Safety Data Sheet (SDS) on request, in the manufacturer's current revision. Use Request TDS or SDS above and tell us what your qualification review needs.
The heat-shrink tubing and sleeve grade, 120 °C and 100 Pa·s at 160 °C.
Another low-softening copolyamide, 110 °C, at 2.4 Pa·s.
Low-softening filter copolyamide at 131 °C and 5 Pa·s at 190 °C.
The Technipol and Technipol PA range by softening point and use.
The adhesive liner of heat-shrink tubing, and the Sipol grade named for it, PA 7115.